Storage Racking Categories
Cantilever Rack
Cantilever racking is designed to store items with long or varied lengths. The system consists of columns connected with horizontal and X braces. Arms are attached to the columns to support the loads. The cantilever shelves are especially designed to store extra long loads and are continuous with no vertical dividers.
Selective Rack
The most popular and versatile of storage equipment; Selective Rack provides efficient use of space and immediate access to every load stored. Hence the name: Selective Rack with 100% access to each pallet.
Double Deep Rack
A hybrid of Selective Rack: Double deep rack systems essentially double the footprint of Selective Rack, with pallets stored two deep and accessed by a common aisle. Approximately a 60% storage gain compared to Selective Rack, in the same footprint.
Push-back Rack
Push-back Rack is a high density storage solution for palletized products where like pallets are stored from 2 to 6 pallets deep in a lane accessed by a common aisle. Push-back utilizes gravity to roll pallets forward to the pick location. Push-back is used extensively where there are higher volumes of each SKU, where 100% access to each pallet is not required.
Carton Flow Rack
Gravity-driven carton flow systems offer a cost-efficient solution for optimizing space, streamlining order picking, and expanding pick locations within existing storage areas. Cartons are placed into storage lanes from one aisle and move toward the opposite aisle, supporting both full and split-case picking while separating picking and replenishment tasks. This system can function independently or be integrated with other technologies, such as conveyors, pick-to-light systems, and multi-level pick modules
Pallet Flow Rack
Pallet Flow is a gravity-driven high-density storage solution where First In, First Out (FIFO) governs. Pallets are placed in each lane from the replenishment side and flow towards the picking side. Pallet Flow is most effective in high volume, lower SKU count applications where lot control/FIFO are paramount.
Drive-In/Drive-Through Rack
Drive-in/Drive-Through racking systems are the ultimate non-powered high-density storage solution. With Drive-In/Drive-Through systems, pallets are driven into individual lanes, where they are placed in vertical columns on the floor and supported rail levels above. Used where volume is ultra high and SKU count relatively low where FIFO is not a concern.
Specialized Storage
We can easily adapt standardized equipment or design new storage solutions for your products. Print die plates, heavy extrusions, mobile aisle, granite or marble slabs.... you name it, we can design it.
Interested in learning more?
Tell us about your project by following this link: